TenTec
[Top] [All Lists]

[TenTec] NB & fuse query

To: <tentec@contesting.com>
Subject: [TenTec] NB & fuse query
From: N4NT@chartertn.net (Mike Hyder)
Date: Wed, 23 May 2001 13:46:48 -0400
You have answered your own question.  The fuse won't blow until 2-3 minutes
key down (assuming a 5 amp fuse).  Those breakers work in milliseconds.

While on the subject, you ought to know that Ten-Tec does not stock
replacement finals for the Argosy.  Presently they can get them at perhaps
$40 each (not sure about the exact price).  A $10 buck investment in the
breaker seems wise.  But on the other hand, you may be happy with your fuse.

73 de Mike N4NT@chartertn.net

----- Original Message -----
From: "Kent A. Badger" <N3KB@webtv.net>
To: <tentec@contesting.com>
Sent: Wednesday, May 23, 2001 1:35 PM
Subject: [TenTec] NB & fuse query


>
> I'm still hoping to find a TT 223A noise blanker for my Argosy
> II......Maybe someone has one they don't need?...... On another
> track.....TT specifies the use of a 9A breaker with the
> Argosy II.....It's my understanding that the breaker will trip at
> exactly 9A and thus protect the circuitry .....I also understand that a
> 9A fast blow fuse would allow some surge current for a few milliseconds
> and possibly damage the rig.....I've experimented with lower value (8,
> 7, 6, 5) fast blow fuses and have found that the rig is very happy with
> a 6A fuse and will even operate for a short time  (2-3 min., key down,
> full power) into 50 ohms with the 5A fuse.....Now the question.....Why
> does TT specify the 9A  breaker rather than a lower value fuse? ......
> It seems to me that the rig would be adequately protected with the 6A
> fuse..... ..........Am I overlooking something?
> ............................thanks......73......Kent



--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>