TenTec
[Top] [All Lists]

[TenTec] mike/vox question

To: <tentec@contesting.com>
Subject: [TenTec] mike/vox question
From: wb2vuf@qsl.net (wb2vuf)
Date: Mon, 14 Aug 2000 20:25:58 -0400
Bob, you need to open the mike and add a jumper wire to keep the
mike audio connected to the output lead all the time. Hand mikes are
often wired to open the mike output as well as the PTT contacts when the
PTT switch is released.


                                73, Bob WB2VUF


Bob Mauro - PeopleNet wrote:
> 
> I have a Scout hand mike, which works fine on my Omni 6 +, but not on vox,
> of course.  if i put a toggle switch to keep the ptt button electrically
> closed, would that work?  there r 3 contacts on the ptt switch.  but only
> 2 control the ptt switch, pin 2 & 3.  The big question is will the mike
> element be connected if i close the toggle switch?  any ideas?
> 
>    Bob Mauro, Mauro@Idt.Net      Amateur Radio Station KZ2G
>    --------------------------------------------------------------
>    My DisAbility Website       http://idt.net/~mauro
>    My Amateur Radio Website    http://idt.net/~mauro/kz2g.html
>    My Levittown, NY Website    http://idt.net/~mauro/levittwn.html
>    --------------------------------------------------------------
>        If my IDT mail bounces, send it to kz2g@altavista.com
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com



--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>