TenTec
[Top] [All Lists]

[TenTec] TT Crystals needed

To: <tentec@contesting.com>
Subject: [TenTec] TT Crystals needed
From: N4NT@wireco.net (Michael O. Hyder)
Date: Sat, 18 Sep 1999 10:27:36 -0400
About the Delta 580, only suggestion is to try Ten-Tec.

About the Omni-C:  There is only one crystal per band.  If it receives on 10
MHz, then the crystal is present and something else is preventing its
working.  Perhaps the early ones were locked out in some way before that
band opened for amateur use.  You might ask Garland Jenkins down at Ten-Tec
Service.

Putting an Omni-C on 18 MHz is a mistake.  The spurious emissions are awful
because of the 9 MHz IF frequency, which doubles and is transmitted.  It was
for this reason that the Delta 580 and Corsair were made as double
conversion rigs with two IF's.  Suggest that if you want to operate 18 MHz,
you do it with your Delta and forego the Omni-C on that band!

73 de Mike N4NT@wireco.net

----- Original Message -----
From: David B. Perrin <d_perrin@conknet.com>
To: tentec reflec <tentec@contesting.com>
Sent: Saturday, September 18, 1999 8:12 AM
Subject: [TenTec] TT Crystals needed


>
> Hi-
>  I am looking for crystals needed in order to:
>  1. put my Ten Tec Delta 580 on 18 MHz
>  2. put my Ten Tec Omni C series B on 10 MHz transmit (it does receive
> now)
>  3. put my Ten Tec Omni C series B on 18 MHz
>
> I am confident I can buy them from TT, but I will try here first.
> Thanks.
> 73 de dave in NH



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>