TenTec
[Top] [All Lists]

[TenTec] Corsair II Power Supplies

To: <tentec@contesting.com>
Subject: [TenTec] Corsair II Power Supplies
From: troy_wideman@eee.org (Troy Wideman)
Date: Mon, 31 Aug 1998 20:12:48 -0700
Jim,
 I just looked in my 961 manual and it says it is rated at 20 Amps full load
and 22 Amps maximum for 5 minutes.
 73, Troy, W6HV

Jimmy D. Roller wrote:

> Hi Mike, et al,
>
> For your further consideration and confusion: I have a model 960 power
> supply that I purchased when I bought the Corsair II. After losing and
> replacing the pass transistor, I made a field upgrade to the 961 using a
> kit supplied by Ten Tec. All that was required was to remove the big
> filter capacitor from the circuit board, turn it upside down and
> reconnect to the board. The manual says the 960 is rated at 22 amps, so
> I assume the 961 and 962 have similiar ratings. Aren't you glad you
> asked?! It has powered the OMNI VI(+) for a number of years including 5
> Field Days.
>
> 73,
>
> Jim, N4IR
>
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>