TenTec
[Top] [All Lists]

[TenTec] LogiKey 3

To: <tentec@contesting.com>
Subject: [TenTec] LogiKey 3
From: pinskeep@iglou.com (Peter Inskeep)
Date: Wed, 15 Jul 1998 20:56:41 +0100
Hi Jim,
Have been running the LogiKey Model K-1 off of the Ten-Tec Delta 580 power
supply for about 2 years, and off the Omni VI Plus power supply now for
about 6 weeks.  No problems at all at any time.  Of course, a K-1 may not
be a  3, and your voltage may vary.  I use the power outlet on the Power
Supply rather than the one on the rig, but same difference as far as I know.

Pete,
NO2D
Pewee Valley, KY

>Anyone use a LogiKey 3 with an OMNI VI+? The keyer calls for 12 volts DC and
>makes quite a thing out of not using anything but pure DC and nothing above
>14 volts DC. The Omni VI+ has a 13.5 DC outlet. That's within .5 volt of the
>top allowable voltage. Will I hear sizzling sounds if I use the Omni VI+
>outlet?
>73
>Jim K7JIH



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>