TenTec
[Top] [All Lists]

[TenTec] Ten-Tec 540 (Triton IV) stuck dial

To: <tentec@contesting.com>
Subject: [TenTec] Ten-Tec 540 (Triton IV) stuck dial
From: wallace@world.std.com (Andy Wallace)
Date: Tue, 18 Mar 1997 02:36:44 GMT
I'm sure Scott won't mind me forwarding his reply back to the Ten-Tec
list -- he's in Sales and I'm sure it will generate some. 

People have asked me for info once I had received it and this is the
stuff... My question is (and I'm sure the lube kit or rebuild kit have
great instructions) -- how does the durned thing come OUT? I scratched
my head for a while without budging the thing, and I thought I had
found all the securing screws. Hmmm. 

Surprisingly, after using the set for a while, the tuning loosened up
until it was almost back to normal. Very high gear reduction on that
rig. Nice! And no doubt this will spark more Triton comments, but I am
very impressed with the rig on CW. The break-in took some getting used
to (I am a tube rig/QSK delay relay man) and I bumped the sidetone
volume up a bit. But now I see why people rave about Ten-Tec QSK. 

The rig has a couple of other problems, however: markings rubbed off
the front panel (does Ten-Tec do rescreenings?), no output on one or
more 10m ranges (yes, the xtals are there), and when I tried SSB, the
relay tripped repeatedly except when going into the dummy load. I
assume I need to find an anti-vox pot inside or something...?

But I am impressed despite the "homebrew" appearance of the rig. I
will probably recommend my friend send it back to Ten-Tec for a
complete checkup and then he'll have a nice little rig to use. 

Here's the reply on the rebuilds. Sorry for taking so long to get to
it!

--Andy
wallace@world.std.com



On Mon, 17 Mar 1997 14:44:16 Eastern Standard Time, "Ten-Tec Inc."
<sales@tentec.com> wrote:

Hi Andy:
You can get a PTO lubrication kit direct from our service department
very cheaply ($2.00).  If that does not solve the problem it may be
time for a PTO rebuild kit, which we can sell you for $20.00 if you
feel up to installing it yourself.  Call service direct at 
(423) 428-0364, 8-4 Eastern, Mon-Fri.

Scott Robbins, W4PA
Ten-Tec Sales  


--
FAQ on WWW:               http://www.contesting.com/TenTecFAQ.html
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>