....and look for a reduction in noise. That is what the data now suggests.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/8/21 6:01 AM, David Gottschalk wrote:
Interesting, I wondered about the validity of this "test"
So really the only way to know for sure if you have common mode noise on
the coax, is to put a filter in place?
73,
David
KN4ZKT
On Thu, Apr 8, 2021 at 1:36 AM Jim Brown <jim@audiosystemsgroup.com> wrote:
On 4/7/2021 7:38 PM, Dave Cole wrote:
Is this true, and if so, why?
No. With the shield disconnected, the antenna is different -- if there's
an effective choke at the top, it's now a long wire ending at the choke,
because the shield and the center are capacity-coupled together. And if
there's no choke at the top, it's a top-loaded long wire.
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|