One idea would be to determine the width of the pulse using a software
based audio scope to see how long it's on (and compare it with the audio
pulse of WWV if that's what you think it might be.
Upload a recording of it, and I would be glad to do this for you (upload it
to youtube, etc).
Don (wd8dsb)
On Thu, Oct 11, 2018 at 4:17 PM Sean Waite <waisean@gmail.com> wrote:
> WWVB maybe?
>
> On Thu, Oct 11, 2018, 16:09 David Robbins <k1ttt@verizon.net> wrote:
>
> > I've heard that before also. if you can do dual rx it is synced nicely
> > with
> > wwv.
> >
> > David Robbins K1TTT
> > e-mail: mailto:k1ttt@arrl.net
> > web: http://wiki.k1ttt.net
> > AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373
> >
> >
> >
> > -----Original Message-----
> > From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of Gary Smith
> > Sent: Thursday, October 11, 2018 19:42
> > To: rfi@contesting.com
> > Subject: [RFI] 1 second pulse on 30M
> >
> > I just discovered a strong pulse on 30M that is exactly 1 second &
> usually
> > is one tick but sometimes sounds like a tock tick, still maintaining the
> 1
> > second interval. I counted 180 ticks with a stopwatch and exactly three
> > minutes.
> >
> > It could pass for WWV but there's no
> > voice. Sounds for the world like an
> > electric fence but nothing like that here.
> > It hasn't been there before, is on no
> > other bands.
> >
> > Any suggestions?
> >
> > 73,
> >
> > Gary
> > KA1J
> > _______________________________________________
> > RFI mailing list
> > RFI@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rfi
> >
> > _______________________________________________
> > RFI mailing list
> > RFI@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rfi
> >
> --
>
> Sent from my Motorola DynaTAC 8000X
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|