Re: [RFI] RF getting into 4-port wirelss router.

[Jim Brown <jim@audiosystemsgroup.com>]

On Sun,1/11/2015 9:42 PM, Hisashi T Fujinaka wrote:
> As an electrician you should be able to get
> some network cable testers to make sure the pairs are right.
There are testers, and there are testers. The cheap ones (less than 
several hundred dollars) are likely to test for nothing more than 
end-to-end continuity. It takes a much more sophisticated tester to 
measure crosstalk. which is what it takes to verify that the pairs are 
actually connected as pairs. :)
73, Jim K9YC


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi