> Thus the solution is to either modify the charger to add wave
> shaping, or filter the HF and MF components of the signal before it
> gets to the fence wire. I have used a series tuned LC circuit at the
> output of a charger (tuned for 160)with success. A LP filter
> arrangement should also work.
So, the series tuned LC circuit was connected to ground, right?
I just wonder if a couple of passes thru a 73-mix binocular core
would work if connected in series between the fence wire and
charger, assuming that there is no arcing to ground somewhere. I would
think the resistance/reactance of that would at least "soften" the
leading edge of the HV square wave. Any thoughts on that?
Anybody tried it?
Charlie, N0TT
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|