CT-User
[Top] [All Lists]

[ct-user] remote spot input to networked computers

To: <ct-user@contesting.com>
Subject: [ct-user] remote spot input to networked computers
From: k4oj@tampabay.rr.com (Jim White, K4OJ)
Date: Sun, 21 Oct 2001 17:32:21 -0400
The contest season is upon us - in addition to the antennas and rigs our
computers have become the next hardware link that needs fine tuning before
00:00zulu.

...I am working on setting up the network for some multi-single club
training efforts in this contest season...

I am using a KA2AEV loop network box to network four assorted older model
computers from 486 to a Pentium 166....

At the other end of the house from the ham stations, in the living room, is
a computer which has internet access via a cable modem - it is very fast...

I am a satisfied registered user of Fabrizios DX-Telnet software, it has
worked well for several seasons....problem is I have been using the
telephone line for connection to the ISP which renders the home of my
gracious hosts ( Ma & Pa ) sans a telephone line...is this remote sight for
packet info sourcing feasible?

I wonder can I use a very VERY long cable to connect the comm port on the
internet access computer for outputting spots into the CT - network which is
maybe 50 feet in the shack...I have some CAT5 cable on a spool and wondering
about using that with some adaptors to the 9 pin comm ports at each end.  I
also have some higher grade cat 5 cables including a 50 and a 75 footer with
moulded connectors at each end - they are labeled as ETL&UL TIA/ETA 568 A
Verified ( I have no idea if this is a good or a poor spec ). I can mate
those with DB9 adaptors.

Has anyone used this long a run between comm ports...or am I asking for
trouble with a commport cable that resembles an HF antenna?

Please respond direct and I will summarize for the group...

Thanks for your time...the fingertips of my sending hand are itchy - must be
da' season!

73,

Jim, K4OJ
Florida Contest Group





<Prev in Thread] Current Thread [Next in Thread>
  • [ct-user] remote spot input to networked computers, Jim White, K4OJ <=