CT-User
[Top] [All Lists]

[ct-user] Radio interface

To: <ct-user@contesting.com>
Subject: [ct-user] Radio interface
From: Dallas Carter" <ludal@dmv.com (Dallas Carter)
Date: Mon, 27 Nov 2000 21:43:32 -0500
You need to edit your cty.dat file.  Use the dos editor, or editor of your
choice, and scroll down to the K's.  You will see many lines of things like
calls with numbers and brackets behind them.  The calls are delimited by
comas.
If you have a line like -  K4BAI(4)[8], W3PP(5)[8],N3AIU(3),
just insert the KH6 as follows:
  -  K4BAI(4)[8], W3PP(5)[8],KH6NO/M(3),N3AIU(3),
This tells the program that if it comes across KH6NO/M that it counts for
U.S. and not Hawaii.  CT does not use the zone for country multiplier, so
your 03 entry counts for zone 3, but it still thinks KH6NO is Hawaii.  Hope
this helps
73  Dallas W3PP

----- Original Message -----
From: Steven R. Schmidt <steven@nuc.net>
To: <ct-user@contesting.com>
Sent: Monday, November 27, 2000 8:41 PM
Subject: [ct-user] Radio interface


>
> I dusted off (and updated to version 9.51.001)) CT prior to the CQWW CW
> contest.  I made up a new keyer interface cable, added the comtsr1 batch
> file for my FT 1000MP (setting comtsr1 for 4800 baud, n82) and checked to
> make sure the interface worked.  The key interface worked fine, but I
found
> out CT was still giving me the "Radio Timeout" message I never figured out
> before (it showed up on my prior desktop and my notebook..other than that,
> the radio interface has always been solid).  Shortly after the contest
> started, I found my radio interface was faulty.  Doing a single band 10
> meter effort, it was disconcerting to have every call I logged convert to
20
> meters.  I could change them back manually, but every time I changed the
> logging line back to 10 meters, the radio would reset to 28005.00,
> effectively losing my spot on the band.  I finally logged off and disabled
> the radio interface.
>
> First question:  Can anyone tell me what boneheaded thing I'm forgetting
> that's keeping my radio interface from working?
>
> During the contest, I logged KH6NO/M, who sent me zone 03.  I faithfully
> logged the contact and correct zone, and noted I got points for the contac
t.
> Since I had already worked the US, and Zone 3, I figure this is a mistake.
> When I change the contact to KH6NO/W6/M, the points go away.  But that's
not
> what he sent...for that matter, I don't really KNOW if he's in California.
>
> Second question:  Can somebody tell me the accepted solution to this
logging
> dilemma?  It's been suggested that the CQWW committee will fix my log
> anyway, but I'm reluctant to knowingly file an incorrect log.
>
> Sorry for the bandwidth, and especially if these topics have been covered
> before.  After a couple years out of contesting, I'm obviously a bit
> confused.
>
> 73,
>
> Steve  K4WA
>
> --
> WWW:                      http://www.k1ea.com/
> Submissions:              ct-user@contesting.com
> Administrative requests:  ct-user-REQUEST@contesting.com
> Problems:                 owner-ct-user@contesting.com
>


--
WWW:                      http://www.k1ea.com/
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
Problems:                 owner-ct-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>