It is not exactly good advice, since CT 9.3x does not work correctly with IC775
also, it is not switching the bands correctly - i.e. it switches but very
slowly, when the radio freq. controlled from CPU it is slow and makes side
effects, while CT 9.2x works fine. I have told already Ken directly, there was
no response.
Follows "my own understanding" of the situation:
I understand he decided to rewrite the whole thing to WIN interface which is
not a small project. As I see it, the versions 9.3x should be seen as an
experiment not completely finished and as I understand it Ken is not really
willing to debug it completely and support it fully since it would be still a
significant amount of work and he wants to concentrate on a new project.
I thing we should understand it, forget about 9.3x and stay happy with 9.2x and
let him work on the new project.
73 !
Jiri Sanda
OK1RI
----------
From: Jim Reisert AD1C
Sent: 24. bøezna 1998 2:01
To: Gerry Hohn
Cc: ct-user@contesting.com
Subject: Re: [ct-user] CT 9.34 & IC-756
It works with 9.36, barely. In SSB it puts all the bands on LSB, not USB
on 20-10. Ken is looking into the problem.
The work-around is to change the hex code in your 756 to 46 and then tell
CT it's connected to an IC775. That does work, even with 9.34
- Jim
At 09:26 AM 3/21/98 -0500, you wrote:
>
>We are planing to us an IC-756 as one rig in our upcoming WPX-SSB effort
>at VE6FI.
>
>Has anyone found a way to interface this radio to CT 9.34?
>
>Please reply direct to ghohn@nortel.com
>
>Thanks, see you in the fray.
>
>
>Gerry VE6LB
>Gerry
>
>--
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|