CQ-Contest
[Top] [All Lists]

[CQ-Contest] Slick New Toy

To: cq-contest <cq-contest@contesting.com>
Subject: [CQ-Contest] Slick New Toy
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net
Date: Fri, 30 Nov 2018 01:43:17 -0800
List-post: <mailto:cq-contest@contesting.com>
Here's another nice new toy from DL-land by way of the UK. The designer is DG5MK. SDR-Kits is some hams in the UK that build and sell the excellent DG8SAQ VNWA Vector Network analyzer and provide great support.

https://www.sdr-kits.net/VA5_Page

$235 got the analyzer and a "better quality" cal kit shipped to my door just before CQWWCW. The better Cal kit was $20 of that cost. I found time to build it on Wednesday -- It took less than two hours to put it together (as I get older I get slower). It's a single-port true vector analyzer, and runs either stand alone on two internal AAs or from VNWA software via a USB port. Decent build quality, the BNC is soldered to the board and bonded to the case at the point of entry. The case is a 2-piece metal clamshell, screwed together at four places. In other words, it's well shielded and has no Pin One Problem!

There's a beautifully printed manual that covers building and operation, with excellent color photos. Text is excellent in the building section, pretty good in the button-pushing area, a bit weak in the concepts area, and badly disjointed to point of being awful in its description of calibration. The latter is a big deal, because it's the first thing you do once you turn it on!

As near as I can tell,when running from VNWA software (FREEWARE), it can do almost everything the VNWA can do with S11 (single-port) measurements, except that choices of sweep rates and dwell time at each data point are a lot more limited. That means I can use the excellent TDR function built into the VNWA software! I don't know yet if I can import complex data made stand-alone. BTW -- the measurement plane is at the end of a 5 ft piece of RG142 from my stash. I find that a convenient length for getting to where I can measure antennas from my shack.

This box is designed to be the stand-alone unit you use in the field and at the top of the tower with no computer, but with the VNWA software conneccted via a USB port, you can make measurements in the shack, including TDR, then export antenna data to SimSmith to transform it to the antenna ffeedpoint, then use SimSmith to design matching networks and compute loss in the feedline and matching networks!

This is a VERY nice unit, and a real bargain!

73, Jim K9YC
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>